Language
英语
西班牙语
俄语
Glue gun and glue stick, perfect match by nature, are good helpers by hand. In daily life, some things fall off or stick.
How to use hot melt glue gun:
1. Before using the hot melt glue gun, please check whether the power supply is energized and whether the brackets are ready; Whether the used glue gun pushes glue smoothly.
2. When the hot melt glue gun is in use, plug in the power cord and preheat it for about 5 minutes or until the adhesive tape melts completely. When the glue gun is not in use, please stand upright on the desktop.
3. After the adhesive tape melts, aim the nozzle of the glue gun at the part to be glued and gently press the trigger to let the melted glue flow out naturally.
4. After use, put the nozzle down and unplug the power plug.
5. Never pull out the adhesive tape from the adhesive inlet.
6. Due to the extremely high temperature of the hot melt glue gun in use, it is forbidden to touch the gun nozzle and glue melting place by hand.
7. When the glue gun works, the glue gun cannot be lifted up, and the gun mouth cannot face upwards. If the glue is not applied for 15 minutes continuously, please cut off the power supply to avoid the glue pouring caused by melting the glue strip backwards and damaging the glue gun.
For more product information, click here: China spray gun.
.jpg?imageView2/2/w/500/h/500/format/jpg/q/100)
.jpg?imageView2/2/w/500/h/500/format/jpg/q/100)
-1.jpg?imageView2/2/w/500/h/500/format/jpg/q/100)
