Today Taizhou Luxi Tool will talk about how to choose t […]
Today Taizhou Luxi Tool will talk about how to choose the right air compressor.
First of all, the working pressure required at the gas end should be determined, plus a margin of 1-2bar, and then the pressure of the air compressor should be selected. Of course, the size of the pipeline path and the number of turning points are also factors that affect the pressure loss. The larger the pipeline path and the fewer turning points, the smaller the pressure loss. On the contrary, the greater the pressure loss.
Therefore, when the distance between the air compressor and the pipelines at each gas end is too far, the diameter of the main pipeline should be appropriately enlarged. If the environmental conditions meet the installation requirements of the air compressor and the working conditions permit, it can be installed nearby at the gas end.
Volume flow type selection:
1. When selecting the volume flow rate of the air compressor, the volume flow rate of all air-using equipment shall be known first, and the total flow rate shall be multiplied by 1.2 (i.e. the margin shall be enlarged by 20%).
2. New projects can be selected according to the flow value provided by the design institute.
3. Find out the volume flow parameters of the gas-using equipment from the gas-using equipment supplier for selection.
4. The reconstruction of air compressor station can be selected according to the original parameter values and actual gas usage.
Appropriate type selection is beneficial to users and air compressor equipment. Excessive and wasteful type selection may lead to long-term loading of the air compressor, insufficient gas consumption or pressure failure.
To learn more details, please contact us: https://www.luxitools.com/