The high-pressure airless paint sprayer uses a high-pre […]
The high-pressure airless paint sprayer uses a high-pressure plunger pump to pressurize the paint by 3000PSI (210kg/cm). The high-pressure paint is delivered to the spray gun through the high-pressure hose, and the pressure is released through the nozzle to form an atomization, thereby forming a dense coating on the wall surface. Floor. Since compressed air is not required for atomizing paint, it is called airless spray.
It has the following advantages:
1.Extremely high coating efficiency. The spraying efficiency is up to 500-1200 square meters per hour, which is more than 10 times that of traditional roller construction
2.Excellent surface quality. The spray coating is smooth, smooth, dense, free of brush marks, rolling marks, and particles.
3.Extend the service life of the coating. High-pressure airless spray can make the paint particles penetrate into the gaps of the wall, make the paint film also form a mechanical bite on the wall, enhance the adhesion of the paint, and extend the service life.
4.Easily overcome corners, voids and uneven areas that are difficult to brush.
5.Save paint. The thickness of the brush coating is very uneven, generally 30-250 microns, the coating utilization rate is low, and the airless spray is easy to obtain a coating with a thickness of 30 microns, which saves 20-30% of the coating.
For details, please consult: air tools.